- It can be used also for a liquid with comparatively high viscosity.
- It is structure without necessity, such as oil supply.
- The motor is made into sealing structure.
Spec
- Model number: HP-601
- Mini type
- Drive source: 100V 2P plug + earthed line
- Material: PP (Polypropylene)
- Liquid junction material Pipe/PP (polypropylene), Propeller: PP (polypropylene), Shaft/hastelloy C, Seal/ceramic, bearing FL, fluorine rubber, hastelloy C, Discharge hose/PVC
- Maximum pumped water volume: 25L/min
- Maximum head: 5m
- Maximum usable viscosity: 200cP
- Maximum available temperature: -50℃
- Size: Total length/711mm, Under head/450mm
- Pipe maximum diameter: 31mm
- Discharge hose inner diameter φ19mm
- Discharge hose length: 1mm
- Weight: 2.2kg
- 2P plug + earthed line
- *Pump performance is with freshwater (at room temperature). *Maximum pumped water volume is when head is 0m, Maximum head is when pumped water volume is 0L. *Maximum used viscosity is when polymer flocculant is used. Available viscosity may decrease depending on liquid. *The shaft does not get wetted.
-
Package size:130×280×790 mm 3.4 kg
https://www.axel-gl.com/en/asone/d/1-7900-10/