Features
- Heating is possible while replacing with inert gas such as nitrogen gas.
- It can be used for material (metal and inorganic compounds) testing, heat treatment, etc.
- Built-in cooling fan reduces body surface temperature during high temperature operation.
- You can set up to 8 patterns of 16 step programs, plus the temperature rise rate.
- Equipped with a completely independent excessive rise prevention device, this is a reassuring design that cuts off the power to the heater when the door is opened.
- It also has a burnout function to detect sensor abnormalities.
- Heating in an inert gas atmosphere is possible!
Spec
- External dimensions (mm): 355 x 460 x 495
- Inner furnace dimensions (mm): 150 x 190 x 120
- Number of pieces: 1
- Maximum temperature (normal/nitrogen gas replacement): 1250 degrees C/about 1000 degrees C
- Heating time (from room temperature to maximum temperature): About 90 minutes (in an empty furnace)
- Sensor/control method: R thermocouple/PID control
- Independent excessive rise prevention function: Heater output OFF at any set temperature (digital setting type)
- Program functions: 16 steps and 8 patterns
- Time setting range: 0 minutes to 99 hours 59 minutes (time setting resolution: 1 minute)
- Heater capacity: 2 Pyromax heaters 1000 W
- Safety mechanism: Sensor malfunction detection, independent excessive rise prevention, no-fuse breaker door switch
- Power supply: 100 VAC 10 A
- Power cord length: 2 m (2P plug)
- Inlet: For hose nipples, 6 mm
- Furnace Material: Ceramic Fiber
- Exterior: Steel Heat Resistant Coating
- Weight: 30 kg
- Accessories: 1 bottom plate (170 x 120 x 8), 1 exhaust vent plug, 3 die supports (20 x 25 x 30), 1 ground wire, gas displacement valve
- *To use while maintaining an inert atmosphere, be sure to keep a small amount of gas flowing.
- *The furnace interior dimensions include the sensor projections.
-
*This product might require extra fees.
Package size：560×460×600 mm 32 kg
https://www.axel-gl.com/en/asone/d/1-5925-11/?cfrom=A0010000