Features
- It is electric and achieves high reproducibility.
- Easy operation: This is not an operation of raising and lowering the piston with the thumb, but a button operation with the index finger. We thoroughly investigated "fatigue resistance."
- User CAL capability: Easily calibrate on-the-job and maintain micropipette accuracy on a daily basis.
- Calibration and display function based on weight (mg): In addition to volume (μL), it is possible to calibrate and display the dispensed amount by mass (mg). This feature ensures unit compatibility when mixing liquids with mass-controlled samples such as solids and powders.
- Designed to resist organic solvents and acidity.
- Continuous dispensing greatly reduces the time required for dispensing.
- It comes with convenient functions such as mixing and reverse operation.
- The unique pre-dispensing feature eliminates the need for initial dispensing.
- Increased impact resistance due to drops: Cushions around the head protect the LCD from the impact of drops.
- Lower parts can be sterilized by autoclaving.
Spec
- capacity range : 100 to 1200 μL
- Performance: 100 at μL (Accuracy ± 2.5%/Reproducibility (CV) 0.6%)/1200 at μL (Accuracy ± 0.5%/Reproducibility (CV) 0.15%)
- Operating Modes: Standard Mode (AUTO), Continuous Dispensing Mode (MD), Mixed Mode (MIX), System Configuration Mode (SYS)
- Min Variable capacity: 1 μL
- Program Memory: 9 Type
- Dispensing speed: 5-level adjustment
- Maximum Dispensing Frequency (on a full charge): Approximately 1,800 Times * in Standard Mode, with the Suction/Discharge Speed Fastest Setting
- AC Adapter (Battery charger and common use): AC100V 50/60 Hz DC5V (standard accessory)
- battery : Lithium-Ion battery 3.7 V/920 mAh
-
Package size：325×155×90 mm 690 g
https://www.axel-gl.com/en/asone/d/62-2240-72/