Features
- All models come with float type dry heating prevention function! In addition, there is a lineup of flow-adjustable types! You can now switch the water flow (strong/weak)!!
- The pump flow rate can be switched in two stages depending on the object by the stirring pump adjustment function.
- The microcomputer PID control provides highly accurate temperature control.
- High safety is achieved by adopting a double lock mechanism consisting of two independent circuits.
- Equipped with an on/off timer function, it can automatically start or stop after a set time.
Spec
- external dimension (mm) : 140 x 150 x 310
- tank inner size (mm) : 194 x 336 x 156
- Type: Waterbath
- Temperature Control Range: R.T. + 5 to 80 ° C (When using the attached water tank, max. 70 ° C)
- temperature settings range ※ 1: -20.0 to + 80.0 ° C
- Temperature Adjustment Accuracy * 2: ± 0.02 ° C
- FEATURES
- Program (Up to 8 steps repeat setting)/Buzzer Alarm
- Abnormal Overheat Prevention Device (thermostat)/Circuit Protector/Float Type Dry-Heating Prevention
- External Temperature Sensor (Sold separately), Recording Meter Output, Alarm Signal Output
- sensors: thermistors
- Heater capacity: 1 kW (Made of Stainless Steel (SUS316))
- Stirring Mechanism: Jet Stirring Type
- pumps ability : discharge amount max/10 L/min , lifting height max/1.4 m (pumps non-consolidated)
- Timer setting range: 1 minute to 99 hours (1 Minute Units)
- Clamp Mountable Width: 40 mm
- power supply : AC100V 50/60 Hz (Power Consumption : MAX 1.1 kVA)
- Accessories: PP (Polypropylene) water tank
- *1 The unit does not have a cooling function. Use an external (Options) cooling device.
- *2 Performance of the controller alone. It depends on the usage conditions.
-
Package size：230×390×230 mm 3.5 kg
https://www.axel-gl.com/en/asone/d/1-5832-43/