Features
- Supports minimum torque of 5N.m or less.
- Since the tip can be replaced, it is suitable for a wide range of work scenes.
- Up to 5 target torques can be memorized, ideal for frequent work.
- An authentic torque measurement function that meets international standards (ISO).
- Check torque by sound and light.
- Proper torque management prevents accidents that cause heat generation and ignition.
- Prevents damage to the base and chips of replaceable cutting tools, thereby protecting the quality of the workpiece itself.
- The advanced digital torque tool "Digilache Driver Type" achieves high accuracy torque measurement regardless of working posture and proficiency.
- The measurement mode and measurement value display mode can be customized for a wide range of situations such as precision equipment, home appliances, and facility maintenance.
- If you remove the No. 1 cloth bit that comes with the porcelain detachable type, you can use various bits with 6.3 mm on the side to the shaft.
- 6.3sq. tip shape, so if you remove the adapter socket, you can use 6.3sq. socket or bit socket.
- LED lamps have been placed for visibility during operation.
- The power will turn off automatically after about 2 minutes of inactivity (can be changed according to custom settings).
- Prevents damage to resin and aluminum parts that are susceptible to torque due to over-tightening.
Spec
- Accuracy: right-hand thread within Torque measurement range, left-hand thread ± 3% + 1 digit (digit = minimum display unit)
- Measurement Direction: right-hand thread, left-hand thread
- Measurement unit: cN m (Convertible by switching N.m, kgf m, ozf · in, ldf · in, lbf · ft)
- power supply : Coin lithium battery (CR 2354)
- Number of memory entries: 5 in preset mode and 1 in pass/fail judgment mode
- Torque measurement range (cN m): 12 to 60 (0.12 to 0.6 N*m)
- Minimum display unit (cN m): 0.05 (0.01 N*m)
- Dimensions B1 (mm): 41
- Dimensions B2 (mm): 20
- Dimensions L (mm): 179
- Dimensions T1 (mm): 33
- Dimensions T2 (mm): 19
- Weight (g): 170
- For working with electrical equipment and electrical boards.
- For cutting tool tip replacement.
- For installation of Plastic and aluminum parts.
- For tightening delicate parts such as sensor, electronic and optical system parts, which do not like vibration and impact.
- For torque tightening work on mass production lines.
- For product assembly and inspection.
- For torque management during maintenance.
- For precision work requiring torque control.
- *Units of measure can be set in both cN m and N*m (100 cN m = 1 N*m).
https://www.axel-gl.com/en/asone/d/63-4031-22/